Acer APS350 Quick Start Manual

The Acer APS350 is a 350W ATX power supply unit designed for desktop computers, providing stable and efficient power delivery with active PFC, multiple protection features (OVP, OCP, OPP, SCP), and a quiet 120mm cooling fan. It features standard ATX connectors including 24-pin main, 4-pin CPU, SATA, and peripheral Molex connectors. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Connections 6. Connecting to Motherboard & Devices 7. Power Management 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 350W power supply unit, AC power cord, mounting screws, user manual.

FeatureDescription
Power Rating350W continuous output
EfficiencyActive PFC (Power Factor Correction)
Cooling120mm quiet cooling fan
ProtectionsOVP, OCP, OPP, SCP (Over Voltage/Current/Power, Short Circuit)
Main Connector24-pin ATX (20+4 pin compatible)
CPU Connector4-pin ATX12V
Peripheral Connectors4-pin Molex connectors
SATA ConnectorsSATA power connectors for drives
AC Input100-240V AC, 50/60Hz universal input
DC Output+3.3V, +5V, +12V, -12V, +5VSB

Installation

Unpack and inspect contents. Ensure computer is powered off and unplugged.

  1. Open computer case: Remove side panel to access power supply bay.
  2. Position PSU: Align APS350 with rear mounting area, fan facing downward or rear as per case design.
  3. Secure with screws: Use provided screws to fasten PSU to case.
  4. Connect cables: Route cables neatly and connect to motherboard and devices.
  5. Close case: Replace side panel after all connections are secure.

WARNING! Ensure computer is unplugged before installation. Handle with care to avoid electric shock.

First-Time Setup

After installation, power on computer and verify operation.

  1. Connect AC power: Plug power cord into APS350 and wall outlet.
  2. Power on system: Press computer power button; check for fan operation and POST.
  3. Verify voltages: Enter BIOS/UEFI to check power supply readings if supported.
  4. Load test: Run system under normal load to ensure stability.

CAUTION! Do not open PSU casing; no user-serviceable parts inside.

Specifications

Controls and Connections

Rear Panel: AC input socket, power switch, ventilation grill. Front (internal): Connector bundle.

Connectors: 24-pin main (20+4), 4-pin CPU, SATA (multiple), 4-pin Molex (multiple), 4-pin Floppy (optional).

Power Switch: On/Off rocker switch at rear. Fan Control: Automatic thermal control for quiet operation. Cable Management: Fixed cables with sleeving for reduced clutter.

Connecting to Motherboard & Devices

Connect all necessary cables for system operation.

  1. Main power: Connect 24-pin to motherboard ATX power socket.
  2. CPU power: Connect 4-pin to motherboard CPU power socket near processor.
  3. SATA devices: Connect SATA power cables to hard drives, SSDs, optical drives.
  4. Peripheral devices: Connect 4-pin Molex to fans, legacy devices if needed.
  5. Ensure secure connections: Push connectors fully until they click.

Tip: Route cables behind motherboard tray for better airflow and aesthetics.

Power Management

Supports ATX power management features.

  1. Soft-off: System can be powered off via OS command.
  2. Standby: +5VSB provides standby power for wake-up functions.
  3. Fan control: Fan speed adjusts automatically based on temperature and load.
  4. Efficiency: Active PFC improves efficiency and reduces harmonic distortion.

WARNING! Do not exceed total 350W power draw; check device power requirements.

Safety Features

Protections: Over Voltage Protection (OVP), Over Current Protection (OCP), Over Power Protection (OPP), Short Circuit Protection (SCP). Safety Certifications: CE, CB, FCC, RoHS compliant.

Care & Maintenance

Keep vents clean from dust. Use compressed air to blow dust from fan and vents periodically.

CAUTION! Unplug power cord before cleaning. Do not use liquids or vacuum cleaner directly on PSU.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE marked for European market. RoHS compliant. Copyright © Acer Inc. For support, visit www.acer.com or contact local Acer service center.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerSwitch/connectionEnsure rear switch is ON; check AC cord and wall outlet; verify connections.
Fan not spinningThermal control/faultFan may not spin at low load; if system overheats or no power, PSU may be faulty.
System shuts downOverload/overheatCheck total power draw; ensure ventilation; clean dust from vents.
Unstable operationInsufficient powerUpgrade to higher wattage PSU if system exceeds 350W.
Burning smellComponent failureImmediately power off and unplug; contact service center.

Reset: Power cycle by turning switch off, unplugging for 30 seconds, then restarting.

Service: Contact Acer support or authorized service center; do not attempt internal repair.

Acer APS350 Quick Start Manual © - All Rights Reserved 2025