Accessory Power ReVIVE Solar ReStore Panel 360 Manual

The Accessory Power ReVIVE Solar ReStore Panel 360 is a portable, foldable solar charging panel designed to recharge compatible power banks, smartphones, tablets, and other USB devices. It features high-efficiency monocrystalline solar cells, a 360-degree adjustable kickstand, multiple USB output ports, integrated cable management, and durable, weather-resistant construction. Ideal for outdoor activities, emergency preparedness, and off-grid power needs. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Foldable solar panel array, 360-degree adjustable kickstand, USB output ports, integrated cable pouch, status LED indicator.

Installation & Setup

Unpack and inspect contents. Ensure all components are present and undamaged.

1. Unfold the Panel: Lay the panel flat on a stable surface, fully extending all four sections.
2. Position the Kickstand: Adjust the 360-degree kickstand to achieve the best angle towards direct sunlight.
3. Connect Your Device: Use your own USB cable to connect your device to one of the panel's USB output ports.
4. Place in Sunlight: Position the entire setup in direct, unobstructed sunlight.

WARNING! Do not expose connected electronic devices to rain, sand, or extreme heat. The panel is weather-resistant, but connected devices may not be.

First-Time Use

For best results, charge in optimal conditions.

1. Initial Check: Ensure the status LED illuminates when placed in sun, indicating power generation.
2. Device Compatibility: Check your device's input specifications. The panel provides standard 5V USB power.
3. Charging State: Connect your device. Charging may begin immediately if sunlight is sufficient and the device's battery is low.
4. Monitoring: Some devices may show a "charging" indicator. Charging speed depends on sunlight intensity.

CAUTION! Never look directly at the sun. Avoid placing the panel where it could focus light and create a fire hazard.

Specifications

• Model: ReVIVE Solar ReStore Panel 360.
• Solar Panel Type: Monocrystalline Silicon.
• Max Power Output: 21W (under ideal laboratory conditions).
• USB Output: Dual USB-A ports, 5V DC, 2.4A max shared output.
• Open Circuit Voltage (Voc): ~9V.
• Dimensions (Unfolded): Approximately 360 x 210 mm.
• Dimensions (Folded): Approximately 180 x 105 mm.
• Weight: 0.5 kg (1.1 lbs).
• Operating Temperature: -10°C to 60°C (14°F to 140°F).
• Ingress Protection: Weather-resistant fabric (not submersible).

Controls and Indicators

The panel has a simple, passive design with one visual indicator.

Status LED: A small LED light located near the output ports. It illuminates when the panel is generating sufficient power from sunlight. It does not indicate charging current or device connection status.

Kickstand: A foldable, adjustable stand integrated into the back panel. Rotate it 360 degrees and set the desired angle for maximum sun exposure.

Cable Management: Elastic cord wraps on the back and a zippered pouch for storing USB cables when not in use.

Connecting Devices

Connect USB-powered devices directly or via a compatible power bank.

1. Ensure the panel is unfolded and in sunlight.
2. Use a high-quality USB cable that is compatible with your device.
3. Plug the USB-A end into either of the panel's output ports.
4. Plug the other end (Micro-USB, USB-C, Lightning) into your device.
5. For best results, charge a power bank first, then use the power bank to charge devices. This provides more stable power.

Tip: Charging a device with the screen on or while in use will significantly slow the charging process. Let the device sleep for fastest charging.

Optimal Charging Practices

Solar charging efficiency depends entirely on environmental conditions.

1. Sunlight: Direct, perpendicular sunlight is crucial. Cloudy days, shade, and low sun angles drastically reduce output.
2. Angle: Adjust the kickstand throughout the day to keep the panel facing the sun.
3. Cleanliness: Keep the solar cell surface clean and free of dust, dirt, and fingerprints.
4. Temperature: Extreme heat can reduce panel efficiency. Provide some airflow if possible.
5. Patience: Solar charging is slower than wall charging. Plan for extended charging times.

WARNING! Do not attempt to disassemble or modify the panel. There are no user-serviceable parts inside.

Care & Storage

Proper care will extend the life of your solar panel.

Cleaning: Wipe the solar cell surface gently with a soft, dry cloth. For stubborn dirt, dampen the cloth slightly with water only. Do not use chemicals, abrasives, or pressure washers.

Storage: Fold the panel neatly, wrap the cables, and store in the included pouch or a cool, dry place away from direct sunlight when not in use for extended periods.

CAUTION! Do not fold the panel when the surface is wet or dirty, as this can scratch the cells. Ensure it is completely dry before storage.

Safety & Warnings

• This product is not a toy. Keep away from children and pets.
• Designed for outdoor use but protect connected devices from the elements.
• Do not use if the panel, cables, or ports are damaged.
• Do not attempt to charge non-USB compatible devices or batteries directly.
• The panel generates DC electricity. Avoid short-circuiting the USB ports.
• Not intended as a primary power source for critical medical or life-support devices.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright and trademarks are property of Accessory Power or their respective owners. For support, visit www.accessorypower.com or contact customer service at 1-800-123-4567.

Troubleshooting

Reset: Disconnect all devices, fold the panel, wait 30 seconds, then unfold and reconnect in full sun.

Service: 1-800-123-4567; www.accessorypower.com