A-Ipower ASP201 Owner's Manual

The A-Ipower ASP201 is a portable power station designed for reliable off-grid power supply. It features multiple output ports (AC, DC, USB), a high-capacity lithium-ion battery, pure sine wave inverter technology, LCD display for monitoring, solar charging capability, overload protection, and quiet operation. Ideal for camping, emergencies, and outdoor activities. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging the Unit 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable power station with lithium-ion battery, LCD display, multiple output ports, solar charging input, carrying handle.

Feature	Description
AC Output Ports	For powering standard household appliances
DC Output Ports	For 12V devices (car accessories, etc.)
USB Ports	For charging phones, tablets, and other USB devices
LCD Display	Shows battery level, input/output power, and status
Solar Charging Input	For recharging via compatible solar panels
Car Charging Input	For recharging via 12V car socket
Wall Charging Input	For recharging via AC wall outlet
Overload Protection	Automatically shuts off if overload is detected
Cooling Fan	Prevents overheating during high load operation
Carrying Handle	For easy portability

Installation

Unpack and inspect contents. Place on stable, dry surface.

Initial Charge: Connect to AC wall outlet using provided adapter for full charge before first use.
Positioning: Ensure unit is placed in a well-ventilated area, away from heat sources and moisture.
Connecting Devices: Plug devices into appropriate output ports (AC, DC, USB).
Solar Panel Setup: Connect compatible solar panel to DC input port if using solar charging.

WARNING! Do not expose to water or extreme temperatures. Keep away from flammable materials.

First-Time Setup

Power on unit; monitor LCD display for status.

Initial Charge: Charge fully via AC wall outlet (LED indicator turns green when complete).
Power On: Press and hold power button for 3 seconds to turn on unit.
Check Display: Verify battery level and output status on LCD screen.
Connect Load: Plug in device to appropriate port and turn on device.

CAUTION! Do not exceed maximum load capacity. Refer to specifications for limits.

Specifications

Battery Capacity: 201Wh lithium-ion.
AC Output: 120V, 60Hz, pure sine wave, 150W continuous.
DC Output: 12V/10A max.
USB Output: 5V/2.4A per port.
Solar Input: 12-24V, 60W max.
Car Input: 12V/8A.
AC Charging: 100-240V, 50/60Hz.
LCD Display: Battery level, input/output power, warnings.
Operating Temp: 32°F to 104°F (0°C to 40°C).
Weight: Approximately 4.5 lbs (2.0 kg).

Controls and Settings

Access functions via buttons and LCD display. Front Panel: POWER button, AC output button, DC output button, USB ports.

LCD Display: Shows battery percentage, input power, output power, remaining runtime, error codes.

Settings: Press and hold power button for 3 seconds to turn on/off. Press AC/DC buttons to enable/disable respective outputs. Battery saver mode: Automatically turns off outputs after 12 hours of inactivity (can be disabled in settings).

Connecting Devices

AC Devices: Plug into AC outlets. DC Devices: Use car adapter plug. USB Devices: Connect via USB-A ports.

Ensure unit is powered on and battery level is sufficient.
Select appropriate output port for your device.
Connect device cable securely.
Turn on device; monitor LCD for power draw.

Tip: Start with highest priority devices first to maximize battery life.

Charging the Unit

Supports AC wall charging, car charging, and solar charging.

AC Charging: Connect AC adapter to wall outlet and DC input port. LED indicator red when charging, green when full.
Car Charging: Plug car charger cable into 12V socket and DC input port while vehicle is running.
Solar Charging: Connect compatible solar panel to DC input port. Ensure direct sunlight for optimal charging.
Charging Time: Approximately 6-7 hours via AC, 8-9 hours via car, 10-12 hours via solar (depending on conditions).

WARNING! Use only provided or manufacturer-approved charging accessories. Do not charge in extreme temperatures.

Safety Features

Overload Protection: Automatically shuts off output if exceeded. Short Circuit Protection: Prevents damage from short circuits. Over-temperature Protection: Cools down if internal temperature too high. Low Voltage Protection: Shuts off before battery is fully depleted to prevent damage.

Care & Maintenance

Store in cool, dry place. Clean with dry cloth only; do not use liquids. Recharge every 3 months if storing long-term.

CAUTION! Do not disassemble unit. Avoid dropping or subjecting to strong impacts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE certified for European market. RoHS compliant. Copyright © 2025 A-Ipower; trademarks of A-Ipower Technology Co., Ltd. For support, visit www.aipower.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't turn on	Battery depleted	Recharge unit fully via AC wall outlet.
No output power	Outputs disabled/overload	Press AC/DC buttons to enable; check for overload and reduce connected devices.
Slow charging	Low power source	Ensure wall outlet/car socket is providing adequate power; check solar panel alignment.
Overheating	High ambient temp/overload	Move to cooler location; reduce load; allow to cool down.
LCD display blank	Battery critically low	Recharge immediately; if problem persists, contact support.

Reset: Turn off, disconnect all devices, recharge fully, then restart.

Service: 1-800-555-1234; www.aipower.com